"Propeller Noise Measurements of 1092 TEU Container", Report to CSBC Keelung Shipyard, June, 1998.
Wang, W. H, Shyu, R. J. and Chang, J. R., "499 GT 鮪釣漁船冷凍機振動量測分析'', 中信造船公司, May, 1998.
Shyu, R. J., "高頻船體結構振動傳遞理論與實驗'', Report of project NSC 86-2611-E-019-001, July, 1997.
Wang, W. H, Shyu, R. J. and Chang, J. R., "阻尼材料與船底縱樑貼板對結構振動與噪音特性之影響分析'',經濟部八十六年度科技發展專案, June, 1997.
Shyu, R. J. and et. al., "CSBC-HNO622 噪音頻譜分析報告'', 中國造船公司高雄廠, April, 1997.
Shyu, R. J. and et. al., "CSBC-HNO621 噪音頻譜分析報告'', 中國造船公司高雄廠, February, 1997.
"主機振源及傳遞路徑之訊號估測'', Report of project NSC 85-2611-E019-026, January, 1997.
"船艛結構噪音之模型測試與分析'', Report of project NSC 84-2611-E-019-011, July, 1995.
"低頻結構噪音傳遞之理論模式與實驗探討'', Report of project NSC 83-0209-E-019-024, July, 1994.
"船艛結構噪音之預估及模型實驗'', Report of project NSC 83-0403-E-019-004, July, 1994.
"船舶艙內噪音之計算與改進'', Report of project CSBC-RD-0372, June, 1994.
"分析與量測船艦引發之水中噪音(二)'', Report of project NSC 82-0209-E-019-071, January, 1994.
"溫差發電廠海水管路技術調查規劃研究'', 台灣電力公司報告, 八十二年八月.
"船艛結構振頻之預估及模型實驗'', Report of project NSC 82-0403-E-019-033, August, 1993.
"Study of Ship Hull Vibrations Induced by Main Engine Excitation Aboard Ship and the Cure of the Intensity of the Corresponding Underwater Noise'', Final Report to China Ship Building Company, July, 1993.
"分析與量測船艦引發之水中噪音'', Report of project NSC 81-0209-E-019-505, December, 1992.
"水中感音器校準技術應用在目標物偵測與辯識之研究'', Report of project NSC 81-0209-E-019-504, October, 1992.
"The Measurement and Analysis of the Water-Borne Noise of a Patrol Boat'', Report to USDRC, August, 1992.
"Study of Ship Hull Vibrations Induced by Main Engine Excitation Aboard Ship and the Cure of the Intensity of the Corresponding Underwater Noise'', Midterm Report to China Ship Building Company, July, 1992.
"Study on the Rolling Stays of Main Engine with its Relevant Problems'', CSBC-RD-0299, July, 1992.
"水中迴響室設計與感音器校準之研究'', Master Thesis, National Taiwan Ocean University, June, 1992.
"Anti-Vibration Structure Design of the Deck in Superstructure and Engine Room'', CSBC-RD-0279, July, 1991.
"Bending Vibration of a Rotating Shaft Under Fluctuating Axial Force'', Report of project NSC 79-0403-E-019-03, January, 1991.
"Vibration and Noise Study of PCEG Main Engine System'', CSBC-RD-0250, June, 1990.
"Bending Vibration of Rotating Drill Strings'', PhD Thesis, Department of Ocean Engineering, Massachusetts Institute of Technology, August 1989.
"Coupled Axial, Bending, and Torsional Vibration of Rotating Drill Strings'', MIT Report, Second Part of the Phase One Final Report, Drilling Engineering Association, Project Number DEA 29, July 1988.
"BEND1PC : A Bending Natural Frequency Prediction Program for Bottom Hole Assemblies'', MIT Report to Industrial Sponsors, July 1987.
"Analysis of the Bending Vibration of the Bottom Hole Assemblies With Case Studies From Quitman Field Test'', MIT Report to Industrial Sponsors, April 1987.
"Bispectrum and Bicoherence Program Users Guide'', MIT Report to Industrial Sponsors, November 1986.
"The Study of Relevant Parameters Concerning the Detection of Failure of Offshore Platforms'', NTU-INA Report, June 1982
"The Estimation of the Natural Frequencies and Damping Ratios of the Offshore Structures'', NSC Report, February 1982